Hire Dedicated Embedded Systems DevelopersVetted by Miracuves · Embedded in Your Hardware Program

Embedded software or embedded hardware: which does a Miracuves developer cover?

Embedded software. Our developers write and maintain firmware: drivers, RTOS tasks, bootloaders, communication stacks, power management and update paths. They are comfortable at the hardware boundary - reading schematics and datasheets, checking pin assignments and boot strategy in design reviews, and debugging bring-up with a logic analyzer, an oscilloscope and a J-Link probe.

They do not design circuits or lay out PCBs, and they do not own the electrical design, component selection or EMC layout. If you searched for embedded hardware developers because the board itself needs designing, you need an electrical engineer or a design house for that part. Many teams pair one with a Miracuves firmware engineer, and we say so in the first call rather than after you have paid.

Bare metal, RTOS or embedded Linux: which developer do you need?

The platform decides the hire, so name it in your brief. Our core vetting covers bare-metal and RTOS firmware on microcontrollers. Embedded Linux work is matched when we have a profile that fits your processor and build system, and we tell you before you commit if we do not. The three differ like this:

• Bare metal - a superloop and interrupts on a small MCU. Best for simple, cost-sensitive devices with tight power budgets.
• RTOS (FreeRTOS, Zephyr) - tasks, queues and priorities on Cortex-M, ESP32 or nRF-class parts. Best once the device juggles radio, sensors and a user interface at the same time.
• Embedded Linux (Yocto, Buildroot, kernel drivers) - an application processor with an MMU, used when the product needs a full network stack, a display or heavy processing.

How does a remote embedded developer work on our hardware?

Firmware has to be proven on the real board, so hardware access is agreed in the brief. The usual routes are shipping dev kits or prototype boards with a debug probe to the developer, or giving remote access to a bench in your lab - a board on a powered USB hub, a remote debug probe, a camera on the LEDs and display, and a scripted power cycle.

Early on, most teams start on the silicon vendor's evaluation kit while their own boards are in fabrication, then move to prototypes at EVT. Whatever the route, every build is flashed and tested on the target, not only in an emulator, and the Friday demo runs on hardware. Shipping, customs and asset tracking for your boards stay under your control.

Can a dedicated developer work to safety and compliance standards?

Yes, in the sense that matters for firmware: we build to the requirements your standard sets. That means MISRA C coding rules where your process uses them, traceable requirements and test records, documented risk controls, and the software lifecycle evidence that frameworks such as IEC 62304 for medical devices, ISO 26262 for automotive or IEC 61508 for industrial safety expect.

Certification itself is yours. Your quality system, your notified body or test house, and your regulatory submissions stay with your organization, and Miracuves does not certify products or hold these certifications itself. For FCC, CE or UL, our engineers debug the firmware side of pre-compliance failures - radio timing, clock settings, power states - alongside your hardware team and your chosen lab.

What does it cost to hire a dedicated embedded developer?

The rates are published: $1,499 a month part-time for 20 hours a week, and $2,999 a month full-time for 40 hours a week. An Embedded Squad of 3-5 people with a delivery lead is quoted per team. There is no placement fee, and every engagement is month-to-month with two weeks' notice.

Hardware programs rarely need the same capacity all year, and the rates follow that. A common pattern is part-time during early bring-up, full-time from EVT through DVT and the production pilot, then part-time again for field fixes and OTA releases. Board costs, test-house fees and lab equipment are not included; they stay on your side.

Why hire firmware developers from India through Miracuves?

Miracuves is based in Mumbai and delivers remotely to hardware teams worldwide; we do not claim offices elsewhere. Our developers work in IST with at least four hours of overlap with your team, confirmed in writing before the engagement starts, so debugging sessions happen live rather than by overnight email.

Distance changes the logistics, not the ownership. The NDA and IP assignment are signed before you share a schematic, all source and build tooling live in your repositories, and the developer works inside your review process like an in-house engineer. What makes a remote firmware hire work is agreeing hardware access up front, which the brief covers on day one.